| INDEX | ALIAS | NAME | UNIT |
|---|---|---|---|
| 0 | DEVICE | Device | |
| 1 | DEVICE_VER_(B/P) | Device ver. (B/P) | |
| 2 | TEMP_FRESH_AIR_CUR | Current fresh air temp | C/10 |
| 3 | TEMP_APT_CUR | Current apartment temp | C/10 |
| 4 | PRESSURE_SUPPLY_CHNL | Supply chnl pressure | Pa |
| 5 | PRESSURE_EXHAUST_CHNL | Exhaust chnl pressure | Pa |
| 6 | FLOW_SETPOINT_[M3/H] | Setpoint flow | m^3/h |
| 7 | PRESSURE_IMB_OK | Pressure imbalance ok | 0=Balanced, 1=Imbalance airflow |
| 8 | PRESSURE_FIXED_IMB | Fixed press imbalance | m^3/h |
| 9 | FLOW_SUPPLY_CUR | Current supply flow | m^3/h |
| 10 | FLOW_EXHAUST_CUR | Current exhaust flow | m^3/h |
| 11 | BYPASS_FLAP_POS | Bypass flap pos | 0=Init, 1=Opening, 2=Closing, 3=Open, 4=Closed, 255=Unknown |
| 12 | BYPASS_FLAP_FUNC | Bypass flap func | 0=Auto, 1=Bypass closed, 2=Bypass open |
| 13 | PREHEAT_REG_STATUS | Preheat reg status | 0=Init, 1=Inactive, 2=Active, 3=Test mode, 255=Unknown |
| 14 | POWER_PREHEAT_REG | Preheat reg power | % |
| 15 | ERROR_CODE_CUR | Current error code | 0=No error |
| 16 | FILTER_DISPLAY | Filter display | 0=Clean, 1=Dirty |
| 17 | GROUND_HEAT_MODE | Ground heat mode | 0=Off, 1=On |
| 18 | TEMP_GROUND_MIN | Min ground heat temp | C/10 |
| 19 | TEMP_GROUND_MAX | Max ground heat temp | C/10 |
| 20 | CO2_SENSOR_NUM | CO2 sensor # (max4) | |
| 21 | CO2_SENSOR_VALUE | CO2 sensor value | ppm |
| 31 | FLOW_SETPOINT | Setpoint flow | m^3/h |
| 32 | PRESSURE_IMB_OK | Pressure imbalance ok | |
| 33 | PRESSURE_FIXED_IMB | Fixed press imbalance | m^3/h |
| 34 | BYPASS_MODE_FUNC | Bypass mode func | |
| 35 | FILTER_RESET_CMD | Filter reset (cmd) | 1=Reset |
| 36 | GROUND_HEAT_MODE | Ground heat mode | |
| 37 | TEMP_GROUND_MIN | Min ground heat temp | C/10 |
| 38 | TEMP_GROUND_MAX | Max ground heat temp | C/10 |
| 40 | BRINK_RESET_CMD | Reset Brink (cmd) | 1=Reset device |
| 41 | CTRL_MODE_SET_CMD | Set control mode (cmd) | 0=Brink device, 1=Modbus |
| 200 | QUALITY | Quality |
