Mennekes Amtron Charge Control

Wallbox • MODBUS TCP (DDF)

Mennekes
Download Signed DDF min. OS version: V10384-01
Device image

MENNEKES AMTRON Charge Control

This DDF enables the integration of the MENNEKES AMTRON Charge Control into the E-Mobility system via Modbus TCP. This enables dynamic charging power control, energy monitoring and integration with external energy management systems (EMS).

The wallbox is designed for intelligent charging applications and supports both single-phase and three-phase installations. In addition to the AMTRON Charge Control, the MENNEKES AMEDIO Professional and MENNEKES AMTRON Professional are also supported.

Requirements

The following requirements must be met to use this DDF:

  • a compatible MENNEKES AMTRON Charge Control, AMEDIO Professional or AMTRON Professional
  • a functioning network connection between the wallboxes and the E-Mobility system
  • enabled and properly configured Modbus TCP communication

Usage

After successful setup, the wallboxes can be integrated into the E-Mobility system via the DDF and used for various applications.

  • Dynamic charging power control: Charging power can be adjusted according to the available electrical power, for example as part of a load management system.
  • Energy monitoring: Available energy data can be collected and used for analysis.
  • Energy management: The wallboxes can be integrated with external energy management systems (EMS).
  • RFID authentication: Depending on the wallbox equipment, RFID can be used for authentication and to start or stop charging sessions.

Important Notes

RFID functionality depends on the equipment and configuration of the respective wallbox.

Manufacturer Type Protocol Model Version ID
Mennekes Wallbox MODBUS TCP (DDF) 1 1 0x0A00001100010100
ID Name Unit Type Direction
0 Vehicle state 65= A (no car), 66= B (car connected), 67= C (charging), 68= D (charging with ventilation), 69= E (error), 70= F (communication error) int IN
1 Power L1 kW real IN
2 Power L2 kW real IN
3 Power L3 kW real IN
4 Voltage L1 V real IN
5 Voltage L2 V real IN
6 Voltage L3 V real IN
7 Ampere L1 A real IN
8 Ampere L2 A real IN
9 Ampere L3 A real IN
10 Power Total kW real IN
11 Energy Total Wh real IN
12 Power unit kW string IN
13 Energy unit Wh string IN
14 Charge setpoint A real OUT
15 CP available int OUT
16 Phase int IN
17 Phases available int IN
18 RFID string IN
19 RFID_START string OUT
20 RFID_STOP string OUT
200 Quality int IN
201 Timestamp datetime IN
204 Info string IN
*2026-01-21 14:54:22 (do) ******************************
Last Commit: cb9252a4 | 2026-01-21 14:54:11
*2026-09-02 06:37:24 (finnerhofer) ******************************
Last Commit: 8638e73c | 2026-08-25 08:05:39